| MCH-2 Chipping Hammer |
|
|
Model MCH-2
|
|
|
Designed For Total Accessibility And Reliability
|
|
Four Bolt Backhead
This unique design reduces handle breakage. The common problem of a threaded handle-to-barrel connection coming loose and damaging the handle and internal parts has been eliminated.
D-Handle
The strong “D” configuration is large enough to provide a comfortable, sure grip, even for a gloved hand.
Minimal Lubrication Required
With its unique design and materials, normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions.
Smoother Operation
The Sullair chipping hammer’s unique backhead design results in greater operator comfort.
Choice of Stroke Length and Bushings
The Sullair chipping hammer is available in 2", 3" and 4" strokes with either .680 round or .580 hex bushings.
Choice of Retainers
Oval collar retainers are included as standard. Optional retainers available are universal ball type, round collar, or quick change segment retainers.
Exhaust Deflector
A durable molded exhaust deflector directs exhaust air away from the operator.
Air Inlet Option
Two air inlet bushings are furnished: 3/8" NPT and 7/8-24, internal thread. The bushings provide for versatile hose connections while protecting the handle inlet threads.
Limited Parts Warranty
Sullair provides a limited parts warranty of two years on the handle and one year on all other parts except the retainer and retainer springs. In addition, should a part other than the retainer or retainer spring wear out during normal operation, it is covered by Sullair’s exclusive chipping hammer warranty.
| Weight |
16 5/8 lbs. |
| Length |
14" |
| Bore & Stroke |
1 1/8" X 3" |
| Blows per Minute |
3600 |
| Air Consumption |
34 cfm |
| Air Inlet |
3/8" NPT or 7/8"-24 |
| Shipping Weight |
18 lbs. |
| Chuck Size |
.680 Round or .580 hex |
|
|
|
* Specifications subject to change without notice.
|
|
|
|
