| MPB-60AS Paving Breaker |
|
|
Model MPB-60AS
|
|
|
Designed For Total Accessibility And Reliability
|
|
High-Wear Parts Reduced
The Sullair breakers have eliminated most high-wear parts. Fewer parts mean less wear, less maintenance, and less downtime.
One Piece, Non-Protrusive Housing
A leak-proof air cushion forms at the end of the piston stroke and stops the piston from direct impact when the tool is not breaking. The elimination of side rods, nuts and springs makes Sullair breakers sleeker and more comfortable to operate.
Minimal Lubrication Required
With only two parts moving during operation, normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions. Manual lubrication before storage is sufficient.
Direct Impact Piston
One moving impact part minimizes maintenance.
Parts Interchangeability
Standardization of design permits a high degree of interchangeability of parts between Sullair models.
Improved Latch Design
Durable double roll pin permits easy steel changing.
Quieter
The piston, impacting directly on the steel shank rather than a tappet, reduces noise level of the breaker.
Super-Silent Muffler
A unique silencer reduces noise levels by 6 dBA, while preventing the tool from freezing, even in the coldest climates.
Flex Handle Option
The flex handle option reduces up to 60% of the vibration to the operator without a loss of power.
Smoother Operation
Reduced kickback is less fatiguing to the operator.
Less Air Consumption
The direct impact piston design, non-corrosive automatic valve and one-piece housing dramatically reduce air consumption. You can operate more tools from a single compressor. For example, a 125 cfm compressor will operate two MPB 90 breakers from one compressor.
Two-Year Limited Warranty
All Sullair breaker parts are warranted for two years against manufacturing defects. Additionally should a part wear out during normal operation, it is covered by Sullair’s exclusive two-year warranty.
| Weight |
71 1/2 lbs. |
| Length |
26 3/4" |
| Bore & Stroke |
2 5/32" X 5 5/32" |
| Blows per Minute |
1360 |
| Air Consumption |
48 cfm |
| Air Inlet NPT |
3/4" |
| Shipping Weight |
79 lbs. |
| Chuck Size |
1 1/8" HX x 6" or 1 1/4" HX x 6" |
|
|
|
* Specifications subject to change without notice.
|
|
|
|
